Payment & Shipping Terms:
|Item Name:||RGB LED Touching Colors Remote Controller||Input Voltage:||DC 12V Or 24V|
|Control Current:||18A||Working Temp:||-20- 60℃|
|Output Control:||3 Circuits (RGB)||Cover Material:||Plastic|
|Application:||RGB LED STRIP|
RGB LED Touching Colors Remote controller 20 meter RF Led Light Controller
005N is a multi-function Touching RGB LED Controller. It adopts the most advanced PWM reomte control technology ,can control all the full color LED lighting with four lines three circuits(common anode),with more than 640000 combination colors and 15 auto light changing modes.it widely applies to RGB LED strip light,LED Module,etc
|Input/output voltage||DC12 or 24V|
|Remote distance||20 meters|
|Output control||3 circuits (RGB)|
|for LED Tape|
Please follow the instructions to use safely.
Attention! Operate Carefully! Please read the following tips carefully.
1 Donot install the product in areas with thundering,strong magnetic and high pressures.
2 Make sure the connection is right and firmed in case of fire accident caused by short circuit.
3 Please install the controller with ventilation to make sure the temperature is appropriate.
4 Please check whether the input voltage,power supply(constant pressure)
acord with the requirements. "
5 Please donnot connect the power before connection.
6 Please contact the supplier when problems occur.Don’t maintain by yourself.
7 The Instruction is for this Item Only,no notification if any amendments.
I Technical Parameters(remote control)
1:Power supply: AAA battery * 3pcs
3:Fabrication processing: multicolour printing & UV varnish
II Technical Parameters(controller)
1. Working voltage:DC12V/24V
2. Output control: 3 circuits(R/G/B)
3. Control current:6A/circuit
4. Connecting mathod: common anode
6. Receiving range:20meters
III Functions of Keys
1. Key 1: on/off
2. Key 2: light changing mode(15 modes)
3. Key 3:color light/white light switching mode
4. Key 4: turn up(brightness/speed)
5. Key 5: turn down(brightness/speed)
IV. How to use
1. Press Key 1 to turn on/off in any state.
2. Press Key 2 to activate light changing mode, a new mode each press,15 modes in total.
3. Press Key 3 once to activate white light mode, changing brightness by pressing Key 4/Key 5. Press Key 3 twice to activate color light mode, changing brightness by pressing Key 4/Key 5 or changing light color by touching the color ring.
4. Resume fuction. The previous settings will be resumed while power on again
Feature chart for Key 2
1 Auto color changing 8 grades of brightness to adjust by pressing Key 4 or Key 5.
2 three colors jumps to change 8 grades of speed to adjust by pressing Key 4 or Key 5 9 Gree color jumps to change 8 grades of brightness to adjust by pressing Key 4 or Key 5.
3 seven colors jumps to change 10 Yellow color jumps to change
4 three colors jumps to gradual change 11 Cyan color jumps to change
5 seven colors jumps to gradual change 12 white color jumps to change
6 red color jumps to change 8 grades of brightness to adjust by pressing Key 4 or Key 5. 13 Red/blue light twinkles alternately 8 grades of speed to adjust by pressing Key 4 or Key 5.
7 Blue color jumps to change 14 Green/blue light twinkles alternately
8 Purple color jumps to change 15 Red/green light twinkles alternately
V Matching code:Press Key 4 once within 3 seconds when power on again,.the light will blink 3 times if matching is successful.Clearing Code Press Key 4 five times within 3 seconds when power on again,.the light will blink 6 times if clearing is successful.
Please don’t touch or press the color ring while loading the battaries to ptrotec the sensitiveness. Please use the remote controller 3 seconds after the battaries are loaded.Please reload the battaries when you find the color ring is not sensitive.
VII Connecting chart